GEBSICONE W2 silicone sealant in a cartridge white

Technical specifications:

• Color: White and translucent
• Appearance: Thixotropic paste (does not run)
• Curing type: Alcohol/Alkoxy (neutral)
• Density: 1.03
• Skin formation time: > 11 min
• Time to loss of tack: Approximately 150 min
• Setting rate: 2 mm in the first 24 hours
• On cross-linked joint:
  - Shore A hardness: 21
  - Modulus of elasticity at 100%: 0.3 MPa
  - Temperature resistance: From -40°C to +120°C
• Resistance: To aging, even in hot and humid environments. To laundry detergents and common household cleaning products
• Adhesion: Excellent on glass, enamel, porcelain, stainless steel, acrylic, cement, synthetic materials and resin, concrete, and painted wood.

Preparation:

• Surfaces must be dry, dust-free, and free of grease.

Instructions for use:

• For joints that are too deep, reduce the depth using cellular foam. In general, the depth of the joint should be less than half its width (for non-through joints).
• Cut the tip of the nozzle to a diameter slightly smaller than that of the joint, then apply the product.
• Smooth the joint, for example using the GEB joint smoother, no later than 5 minutes after application.
• Do not apply the sealant if the temperature is below +5°C or above +40°C.

Standards:

GEBSICONE W2 has fungicidal performance in accordance with the international standard ISO 846.