XOMOX wafer-type butterfly valve with PFA-coated cast iron body dn150 ~ 6'' ~ ø168.30

Robinetterie revêtue
Robinet papillon WAFER XOMOX corps fonte revêtu PFA
search
  • Robinet papillon WAFER XOMOX corps fonte revêtu PFA
  • Nomenclature dn50-300 Robinet papillon WAFER XOMOX corps fonte revêtu PFA
  • Nomenclature dn350-400 Robinet papillon WAFER XOMOX corps fonte revêtu PFA
  • Dimensions dn50-150 Robinet papillon WAFER XOMOX corps fonte revêtu PFA
  • Dimensions dn200-300 Robinet papillon WAFER XOMOX corps fonte revêtu PFA
  • Dimensions dn350-400 Robinet papillon WAFER XOMOX corps fonte revêtu PFA
  • Dimensions papillons Robinet papillon WAFER XOMOX corps fonte revêtu PFA
  • Dimensions platines Robinet papillon WAFER XOMOX corps fonte revêtu PFA
  • Dimensions raccordements Robinet papillon WAFER XOMOX corps fonte revêtu PFA
  • application performance Robinet papillon WAFER XOMOX corps fonte revêtu PFA
  • Caractéristique d'ecoulement Robinet papillon WAFER XOMOX corps fonte revêtu PFA
  • Coéfficients de debits Robinet papillon WAFER XOMOX corps fonte revêtu PFA
  • Coéfficients pour le controle de debits dn50-200 Robinet papillon WAFER XOMOX corps fonte revêtu PFA
  • Coéfficients pour le controle de debits dn250-400 Robinet papillon WAFER XOMOX corps fonte revêtu PFA
  • Couple de manoeuvre Robinet papillon WAFER XOMOX corps fonte revêtu PFA
  • Courbe pression temperature Robinet papillon WAFER XOMOX corps fonte revêtu PFA
  • Courbe de tenue au vide Robinet papillon WAFER XOMOX corps fonte revêtu PFA

Photos non contractuelles

XOMOX WAFER Butterfly Valve, PFA-coated cast iron body, PN10

Application:

XOMOX PFA-coated butterfly valve with smooth-bore lugs for shutting off or regulating fluids in chemical and pharmaceutical systems, petrochemical industries, and vacuum applications.
Low operating torque allows for the use of compact actuators. PTFE sealing
ring covering the shaft and protecting it against corrosion.

  • Chemical and pharmaceutical industries, petrochemical industries, and vacuum systems
  • Minimum and maximum permissible temperatures Ts: -20°C to +200°C
  • Maximum allowable pressure Ps: 16 bar up to DN150, 10 bar above that (see curve)
  • Maximum differential pressure: 10 bar for all DN sizes

Available in:

  • PFA-coated cast iron smooth-flanged butterfly valve with handle actuation, PN10/16, from DN50 to DN150
  • PFA-coated cast iron smooth-flanged butterfly valve with handwheel actuator, PN10, from DN200 to DN400
Plus de détails
Normes et certifications : ATEXType de raccordement : Entre brides PN10-16
dn150 ~ 6'' ~ ø168.30
XLDWFP0PN160150
Diameter (in inches): DN150 ~ 6'' ~ Ø168.30
PRODUCT AVAILABLE EXCLUSIVELY ON QUOTATION
mode_edit Request a quote
Consulter les produits disponibles sous forme de liste
Are you an individual?

Save time and have it delivered to your workplace..

Are you a professional?

Turn your personal account into a pro account and get discounts and preferential rates.. More about the pro account

Certificates materials pour XOMOX wafer-type butterfly valve with PFA-coated cast iron body

Would you like to order materials that require a material certificate?

Here are the steps to follow :

1. Add product to cart.

2. Vérifiez que la référence produit actuellement sélectionnée corresponde au produit concerné et ajoutez au panier le material certificate desired).

Currently selected product reference : --

Complément d'information XOMOX wafer-type butterfly valve with PFA-coated cast iron body

The tables and information provided on this page are for indicative purposes only. For tolerances and exact specifications, please refer to the applicable product standards.

Features:

  • 2-piece body
  • PFA lining
  • Low operating torque
  • Triple FKM seals on the shaft
  • Spring washers that continuously compress the packing for excellent sealing
  • Inner bearing sleeve for optimal corrosion resistance
  • Fugitive emissions EN 15848-1:2006 and TA LUFT VDI 2440
  • Monoblock stem and disc combined with an anti-ejection system (API 609 compliant)
  • Wide PFA sleeve protecting the FKM cores
  • Motorizable (ISO 5211 mounting plate)
  • PTFE sealing ring on the shaft providing corrosion protection
  • Smooth-bore model (wafer type)
  • Between flanges PN10/16 up to DN150, PN10 beyond
  • Cast iron GS handle, lockable, 8-position ratchet up to DN150
  • Orange RAL2009 polyurethane (PUR) paint, 80–100 μm thick

Construction:

  • Dimensions: DN50 to DN400
  • Connection: Between PN10/16 flanges up to DN150, PN10 above
  • Max. Pressure: 16 bar (10 bar from DN200)
  • Material: EN-GJS-400-18-LT cast iron body with PFA coating

Standards:

  • ISO 9001:2015 certified manufacturer
  • DIRECTIVE 2014/68/EU: CE No. 0575 Risk
    Category III, Module H
  • Certificate 3.1 available upon request
  • Leak testing in accordance with EN 12266-1, Class A
  • Fugitive emissions in accordance with EN 15848-1:2006 Class BH and TA LUFT VDI 2440
  • Valve compliant with EC Regulation 1935/2004 and FDA upon request
  • Flange-to-flange connection in accordance with EN 1092-1 PN10/16
  • Flange plate in accordance with ISO 5211
  • Spacing in accordance with ISO 5752 short series 20, EN 558 series 20, except DN350 in accordance with EN558 series 108
  • ATEX Group II Category 2 G/2Dc Zone 1 & 21 Zone 2 & 22 in accordance with Directive 2014/34/EU

Caractéristiques techniques XOMOX wafer-type butterfly valve with PFA-coated cast iron body

Data sheet

Reference
XLDWFP0PN160150
Gamme
XOMOX
Corps
Corps Fonte EN-GJS-400-18-LT revêtu PFA
Type de raccordement
Entre brides PN10-16
Diamètre
En fonction du modèle choisi
Pression maximum
10 bar 16 bar
Température minimum
-20°C
Température maximum
200°C
Fluide admissible
Industries chimiques Industries pharmaceutiques Industries pétrochimiques
Normes et certifications
ATEX CE 1935/2004 Directive 2014/68/UE EN 12266-1 ISO 9001 : 2015
Normalisation
Directive 2014/68/UE
Poid
En fonction du modèle choisi
Possibilité de certificat 3.1
Oui
Possibilité de marquage ATEX
Oui
Unité de vente
Pièce

Download documentation

FT XLDW

Fiche technique Robinet papillon WAFER XOMOX corps fonte revêtu PFA

Download (1.15MB)

Accessoires et équipements (vendus séparément)

Caractéristiques liées à la version du produit XOMOX wafer-type butterfly valve with PFA-coated cast iron body

Voici la liste des références et poids correspondants aux options séléctionnées.
XLDWFP0PN160050 - XOMOX wafer-type butterfly valve with PFA-coated cast iron body - DN50 ~ 2'' ~ Ø60.30
Diameter (in inches) DN50 ~ 2'' ~ Ø60.30
Packed weight 8,6kg
Consulter
XLDWFP0PN160065 - XOMOX wafer-type butterfly valve with PFA-coated cast iron body - DN65 ~ 2''1/2 ~ Ø76.10
Diameter (in inches) DN65 ~ 2''1/2 ~ Ø76.10
Packed weight 9,1kg
Consulter
XLDWFP0PN160080 - XOMOX wafer-type butterfly valve with PFA-coated cast iron body - DN80 ~ 3'' ~ Ø88.90
Diameter (in inches) DN80 ~ 3'' ~ Ø88.90
Packed weight 9,6kg
Consulter
XLDWFP0PN160100 - XOMOX wafer-type butterfly valve with PFA-coated cast iron body - DN100 ~ 4'' ~ Ø114.30
Diameter (in inches) DN100 ~ 4'' ~ Ø114.30
Packed weight 12,5kg
Consulter
XLDWFP0PN160125 - XOMOX wafer-type butterfly valve with PFA-coated cast iron body - DN125 ~ 5'' ~ Ø139.70
Diameter (in inches) DN125 ~ 5'' ~ Ø139.70
Packed weight 14,3kg
Consulter
XLDWFP0PN160150 - XOMOX wafer-type butterfly valve with PFA-coated cast iron body - DN150 ~ 6'' ~ Ø168.30
Diameter (in inches) DN150 ~ 6'' ~ Ø168.30
Packed weight 17,8kg
Consulter
XLDWFP0PN100200 - XOMOX wafer-type butterfly valve with PFA-coated cast iron body - DN200 ~ 8'' ~ Ø219.10
Diameter (in inches) DN200 ~ 8'' ~ Ø219.10
Packed weight 30,1kg
Consulter
XLDWFP0PN100250 - XOMOX wafer-type butterfly valve with PFA-coated cast iron body - DN250 ~ 10'' ~ Ø273.10
Diameter (in inches) DN250 ~ 10'' ~ Ø273.10
Packed weight 37kg
Consulter
XLDWFP0PN100300 - XOMOX wafer-type butterfly valve with PFA-coated cast iron body - DN300 ~ 12'' ~ Ø323.90
Diameter (in inches) DN300 ~ 12'' ~ Ø323.90
Packed weight 70kg
Consulter
XLDWFP0PN100350 - XOMOX wafer-type butterfly valve with PFA-coated cast iron body - DN350 ~ 14'' ~ Ø355.60
Diameter (in inches) DN350 ~ 14'' ~ Ø355.60
Packed weight 120kg
Consulter
XLDWFP0PN100400 - XOMOX wafer-type butterfly valve with PFA-coated cast iron body - DN400 ~ 16'' ~ Ø406.40
Diameter (in inches) DN400 ~ 16'' ~ Ø406.40
Packed weight 150kg
Consulter
Référence - Désignation Diameter (in inches) Packed weight
XLDWFP0PN160050 - XOMOX wafer-type butterfly valve with PFA-coated cast iron body - DN50 ~ 2'' ~ Ø60.30 DN50 ~ 2'' ~ Ø60.30 8,6kg
XLDWFP0PN160065 - XOMOX wafer-type butterfly valve with PFA-coated cast iron body - DN65 ~ 2''1/2 ~ Ø76.10 DN65 ~ 2''1/2 ~ Ø76.10 9,1kg
XLDWFP0PN160080 - XOMOX wafer-type butterfly valve with PFA-coated cast iron body - DN80 ~ 3'' ~ Ø88.90 DN80 ~ 3'' ~ Ø88.90 9,6kg
XLDWFP0PN160100 - XOMOX wafer-type butterfly valve with PFA-coated cast iron body - DN100 ~ 4'' ~ Ø114.30 DN100 ~ 4'' ~ Ø114.30 12,5kg
XLDWFP0PN160125 - XOMOX wafer-type butterfly valve with PFA-coated cast iron body - DN125 ~ 5'' ~ Ø139.70 DN125 ~ 5'' ~ Ø139.70 14,3kg
XLDWFP0PN160150 - XOMOX wafer-type butterfly valve with PFA-coated cast iron body - DN150 ~ 6'' ~ Ø168.30 DN150 ~ 6'' ~ Ø168.30 17,8kg
XLDWFP0PN100200 - XOMOX wafer-type butterfly valve with PFA-coated cast iron body - DN200 ~ 8'' ~ Ø219.10 DN200 ~ 8'' ~ Ø219.10 30,1kg
XLDWFP0PN100250 - XOMOX wafer-type butterfly valve with PFA-coated cast iron body - DN250 ~ 10'' ~ Ø273.10 DN250 ~ 10'' ~ Ø273.10 37kg
XLDWFP0PN100300 - XOMOX wafer-type butterfly valve with PFA-coated cast iron body - DN300 ~ 12'' ~ Ø323.90 DN300 ~ 12'' ~ Ø323.90 70kg
XLDWFP0PN100350 - XOMOX wafer-type butterfly valve with PFA-coated cast iron body - DN350 ~ 14'' ~ Ø355.60 DN350 ~ 14'' ~ Ø355.60 120kg
XLDWFP0PN100400 - XOMOX wafer-type butterfly valve with PFA-coated cast iron body - DN400 ~ 16'' ~ Ø406.40 DN400 ~ 16'' ~ Ø406.40 150kg

Customer reviews (0)

No customer reviews for the moment.

Log in to share your opinion